# Problem using Wifi Starter for BLE Sniffer

**URL:** <https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464>\
**Category:** BLE Gateway\
**Created:** [January 29, 2016, 9:33am UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464 "2016-01-29T09:33:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ckzhuo](https://bbs.aprbrother.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@ckzhuo](https://bbs.aprbrother.com/u/ckzhuo)\
**Post date:** [January 29, 2016, 9:33am UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464/1 "2016-01-29T09:33:05Z")

</div>

When using the BLE Sniffer (with 2 red lights and 1 yellow light), my Wifi Starter keeps saying “No new device found!”

Please help troubleshoot, am I missing anything?

---

<div class="post-metadata">

**Author:** ![aprilpea](https://bbs.aprbrother.com/user_avatar/bbs.aprbrother.com/aprilpea/32/9_2.png) [@aprilpea](https://bbs.aprbrother.com/u/aprilpea)\
**Post date:** [January 29, 2016, 10:30am UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464/2 "2016-01-29T10:30:17Z")

</div>

Did the green LED begin to fast blink?

---

<div class="post-metadata">

**Author:** ![ckzhuo](https://bbs.aprbrother.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@ckzhuo](https://bbs.aprbrother.com/u/ckzhuo)\
**Post date:** [January 29, 2016, 6:10pm UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464/3 "2016-01-29T18:10:04Z")

</div>

No, it is a slow blink.

Now I can connect to the sniffer from the web, but, I can’t get any messages from my MQTT client when I connect to the online test broker.

---

<div class="post-metadata">

**Author:** ![ckzhuo](https://bbs.aprbrother.com/letter_avatar_proxy/v4/letter/c/898d66/32.png) [@ckzhuo](https://bbs.aprbrother.com/u/ckzhuo)\
**Post date:** [January 29, 2016, 6:12pm UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464/4 "2016-01-29T18:12:03Z")

</div>

The green light is blinking, but slow blinking.

---

<div class="post-metadata">

**Author:** ![aprilpea](https://bbs.aprbrother.com/user_avatar/bbs.aprbrother.com/aprilpea/32/9_2.png) [@aprilpea](https://bbs.aprbrother.com/u/aprilpea)\
**Post date:** [February 1, 2016, 2:38am UTC](https://bbs.aprbrother.com/t/problem-using-wifi-starter-for-ble-sniffer/464/5 "2016-02-01T02:38:21Z")

</div>

The sniffer should connected to your network if the green LED blink. You can check the IP list in the AP route setup page.

You can also use the app “Net Analyzer” at iPhone to scan the device with manufacture name “Texas Instruments”.

Which command line did you use to test?