# About Cactus Micro R2 recently

**URL:** <https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493>\
**Category:** Arduino\
**Created:** [February 29, 2016, 1:45am UTC](https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493 "2016-02-29T01:45:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![aprilpea](https://bbs.aprbrother.com/user_avatar/bbs.aprbrother.com/aprilpea/32/9_2.png) [@aprilpea](https://bbs.aprbrother.com/u/aprilpea)\
**Post date:** [February 29, 2016, 1:45am UTC](https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493/1 "2016-02-29T01:45:19Z")

</div>

The default firmware for esp8266 is espduino not AT firmware. The espduino firmware is easier to use for REST http request. Some examples available [here](http://wiki.aprbrother.com/wiki/Cactus_Micro_R2_Tutorial#For_espduino_library_from_Tuan_PM).

If you’d like use previous AT firmware, you can re-flash the firmware yourself.

- The [AT firmware](http://abcdn1.qiniudn.com/ai-thinker-0.9.5.2-9600.bin?attname=)
- [How to made Cactus Micro R2 as ESP8266 programmer](http://wiki.aprbrother.com/wiki/How_to_made_Cactus_Micro_R2_as_ESP8266_programmer)

---

<div class="post-metadata">

**Author:** ![rfinn](https://bbs.aprbrother.com/letter_avatar_proxy/v4/letter/r/dec6dc/32.png) [@rfinn](https://bbs.aprbrother.com/u/rfinn)\
**Post date:** [April 18, 2016, 5:26pm UTC](https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493/2 "2016-04-18T17:26:10Z")

</div>

I wasn’t using AT, I followed the Tuan PM guides. The buad rate for Serial1 was different, but I figured it out - 115200. However, I’m getting “ets Jan 8 2013,rst cause:1, boot mode:(3,7)” and no further functionality from the ESP8266.

---

<div class="post-metadata">

**Author:** ![aprilpea](https://bbs.aprbrother.com/user_avatar/bbs.aprbrother.com/aprilpea/32/9_2.png) [@aprilpea](https://bbs.aprbrother.com/u/aprilpea)\
**Post date:** [April 19, 2016, 1:35am UTC](https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493/3 "2016-04-19T01:35:30Z")

</div>

Did you upload the espduino firmware yourself? Please try to upload the sketch rest.ino from example page.

---

<div class="post-metadata">

**Author:** ![aprilpea](https://bbs.aprbrother.com/user_avatar/bbs.aprbrother.com/aprilpea/32/9_2.png) [@aprilpea](https://bbs.aprbrother.com/u/aprilpea)\
**Post date:** [September 20, 2016, 1:55am UTC](https://bbs.aprbrother.com/t/about-cactus-micro-r2-recently/493/4 "2016-09-20T01:55:35Z")

</div>


